贵州省食用菌产业现状与可持续性发展分析

笔者分析了贵州省食用菌产业特点与产业优势,认为贵州食用菌产业在自然条件、交通条件以及政策条件等方面均具有较大优势;全省食用菌规模逐渐扩大,品牌效应凸显。进一步总结了贵州省食用菌产业存在的问题,即缺乏行业规范,产品结构较为单一,行业人才匮乏。继而提出了贵州省食用菌产业可持续性发展建议,即加大食用菌产业的开发程度,加强科技支撑及专业人才培养,政府统筹,建立行业标准,重视菌渣的综合开发利用,以实现本省食用菌产业的后发赶超和可持续性发展。     

有初始缺陷板件超屈曲强度的半分析法研究

本文应用大挠度理论分析了初始缺陷对板件超屈曲强度的影响,并为板件后屈曲分析提出了一个样条函数半分析计算法.该法对各种载荷及位移边界条件板件均可进行计算,与有限元法等相比较,具有计算量少,精度高等显著特点.数值计算结果为冷弯型钢结构设计提供了较完善的理论依据.     

甲醛捕捉剂在胶合板生产中的应用

普通UF树脂胶中添加甲醛捕捉剂H300或H800后,其固化时间明显延长.采用H300或H800改性的UF醛树脂胶黏剂生产胶合板,在保证胶合强度的前提下,板材的甲醛释放量达到国标E2或E1级要求.     

哺乳动物原始生殖细胞与EG细胞研究进展

本文综述了哺乳动物原始生殖细胞的来源、增殖、迁移及生物学特点及近年来国内外用原始生殖细胞分离EG细胞的研究进展，探讨了EG细胞作为另一种多能性干细胞的优越性。     

改善E1级胶合板用UF胶粘剂预压性能的研究

利用氧化淀粉在树脂合成后期、API在调胶时加入分别对脲醛树脂进行改性，探讨改性UF对胶合板预压强度的影响。采用正交实验法对比改性后胶合板的预压性能和改性后胶合板的甲醛释放量的变化。结果表明：随着API量的加大，胶合板的预压性能得以提高；而氧化淀粉改性后则随着量的加大，一定范围内胶合板的预压性能得以提高，加入量继续加大后反而下降。     

干细胞与肿瘤研究进展

肿瘤是危害人类健康的恶性疾病,近年来越来越多证据显示肿瘤与干细胞有着密切的关系。肿瘤可能是干细胞在异常微环境中差异分化的结果。它与正常干细胞有相似的表面标志和生化特点。在此,综述了干细胞与肿瘤发生的关系及干细胞工程在肿瘤治疗中的应用前景,旨在为肿瘤发生发育的研究及干细胞在肿瘤治疗方面的应用提供理论依据。     

Influence of death struggle on the structural changes in chub mackerel muscle during chilled storage

ABSTRACT: Chub mackerel (34–35 cm, approximately 500 g), which were caught by fishing with a rod and line at the Bungo Channel, Oita prefecture, were rested overnight in a fish preserve and either killed by decapitation (control group) or allowed to struggle in air for 30 min (struggled group). Muscle samples were excised every 4 h, and measurements on breaking strength and histological observations were done for both groups. The breaking strength of muscle in the control group was significantly higher than that in the struggled group, whereby a decrease in breaking strength was delayed for 12 h compared to the struggled group. Light microscopy showed space extension among muscle cells in association with a decrease in breaking strength. Especially in the struggled group, the extended area was larger and the difference in area was significant at the time when breaking strength showed a significant difference. Using electron microscopy, the extended area showed cut and/or disappeared collagen fibrils. From these results, it was demonstrated that struggling to death promoted the degradation of collagen fibrils and the weakening of connective tissue and, resultantly, led to the faster softening of muscle of chub mackerel.     

Application of acoustic Doppler current profiler combined with a scientific echo sounder for krill Euphausia pacifica density estimation

ABSTRACT:   An application of the acoustic Doppler current profiler (ADCP, 153.6 kHz) in combination with a scientific echo sounder (EK60, 38 and 200 kHz) was investigated to estimate the density of krill Euphausia pacifica . The acoustic backscattering strength from sound scattering layers was compared with biomass estimates from midwater trawls. Euphausia pacifica was targeted among mixed species populations in the sound scattering layer in the offshore Funka Bay area of Hokkaido, Japan. The frequency characteristics of acoustic backscattering by krill were calculated using a distorted wave Born approximation scattering model at three frequencies. Krill aggregations identified from the EK60 data were extracted as the mean volume backscattering strength difference between two frequencies. They were then used to identify similar aggregations in the ADCP data by matching observation times and depths for the two methods, which were applied simultaneously. Results from the comparison of the mean volume backscattering strength and the density calculated from the ADCP and EK60 showed that ADCP can be used to measure density and spatial–temporal distribution of krill aggregations. Current speed and direction at the study site were found to be 16.1 cm/s and 187.0°, respectively, and krill speed and direction (including the current component) were found to be 19.8 cm/s and 172.2°, respectively. Based on the ADCP data, the net speed and direction of the krill aggregations were found to be 5.9 cm/s and 128.0°, respectively.     

Evaluation of Five Most Commonly Grown Cotton Cultivars (Gossypium hirsutum L.) Under Mediterranean Conditions: Productivity and Fibre Quality

Studies were conducted in four regions of central Greece (Larisa, Karditsa, Livadia, Thiva), to evaluate the productivity and fibre properties (fibre strength and fibre length) of the five most commonly grown cotton cultivars in these regions. The experiments lasted for 6 years (1995–2000). All the characteristics tested were strongly influenced by the factors ‘year’, ‘cultivar’ and ‘region’. Significant cultivar × region, year × cultivar, region × year and cultivar × region × year interactions occurred for all the characteristics studied. The cultivar Alegria had the highest seed‐cotton and lint yield, while Aria had the lowest ones. Both cultivars gave the highest mean lint percentage but the lowest mean boll weight (MBW). Alegria had the lowest fibre strength, while Aria had the highest. The Acala‐type cultivars, Acala SJ2 and Zeta 2, had intermediate seed‐cotton and lint yield, while Vered 171 had high seed‐cotton and satisfactory lint yield. The three cultivars mentioned above had the highest MBW and very good fibre strength. Positive correlation was observed between fibre strength and length. In spite of the fact that mean fibre length was statistically the same in all cultivars, it was influenced by the factor ‘year’, as a result of different weather conditions. The year 1996 was the most unfavourable one for seed‐cotton yield and MBW, because it was characterized by lower than average air temperatures and rather dry conditions for all study sites. The factor ‘region’, a combination of different climatic conditions and cultural practices, influenced significantly all the parameters studied.     

室内型胶合板天然耐久性的初步研究

作为一项反映材料优劣的重要的评价指标,天然耐久性直接决定了材料的使用寿命.笔者通过对胶合板胶合强度性能连续14年的跟踪测定,讨论和分析了胶合板的天然耐久性.最后总结出了胶合板在使用过程中随时间迁移其胶合强度性能随外界变化的规律,以期为胶合板的生产制备、生产工艺的改进及其应用领域的拓宽等方面起到一定的指导作用.